Authentic VCP (Vaperz Cloud Piglet) Box Mods Just Came In!! February 09, 2016 14:45
Check out The VCP aka Piglet, another winner from our friends at Vaperz Cloud who are always coming out with quality vape gear.
- Solid Alloy and brass outer construction
- Fully mechanical
- Dual 18650 battery setup in series (8.4 volts!)
- Full high grade copper contacts
- Adjustable solid copper 510 pin
- Flush mounted delrin firing button (no need for locking switch)
- Flush mounted battery door with clear positive and negative icons for correct battery configuration
Please abide by the following:
- This is an advanced piece of hardware. Proper battery and ohm's law knowledge is critical in using this device.
- This device runs two batteries in series. Two identical, high-amp, paired and married batteries must be used, and charged simultaneously. Batteries not included.
- Do not use any tank atomisers with pre-made coils, there are none on the market designed to be run at 8.4v.
- This device outputs 8.4v on fully charged batteries. The lowest recommended resistance for use on this device is 0.4ohm, in conjunction with high-amperage (20 Amp Continuous) cells.
- Batteries MUST NOT be placed the same orientation (++ one end, -- the other), as this will short out the device. One cell must be upside down, the other right way up.
**warning this device is 8.4 volts, please know ohm's law before using**